Tag Archives: building

Remodel Citizen, Homeowner

Buying your first home is supposed to be one of the greatest moments of any young adult’s life.  And at this time in history, with the economy and housing market just barely starting to emerge back from the deep abyss of The Great Recession, with so many post-grads still living with Mom and Dad, I—at the tender age of 28—recently became “Yusef Seidy, Homeowner” (yes I plan to print business cards).

It has been, to date, my most crowning achievement—especially considering the pattern of fuck-off-ery that marred my youth.  I was, to put it nicely, a burnout during my collegiate years.  The kind of shaggy-haired, quasi-rasta, new age hippie who listened to Dark Side of the Moon way too much (and often synced with The Wizard of Oz—seriously, try it if you haven’t).  But I digress…

I purchased a modest sized condominium, in a modest sized building in Redondo Beach, CA.  It is literally five blocks from my office, and one mile from the ocean.  The building is on the older side, built in 1967, but it’s been well maintained and has a certain street appeal.  The unit itself is on the first floor in the very front of the building.  It was clean, with great potential, but needed work, and therein laid the trouble.

First Disclaimer: Your Homeowners Association (HOA) is probably a group of older neighbors who have the time to sit around judging whether to approve or deny any improvements you propose to what is technically yours.  I say technically, because common areas belong to everyone in the complex; and, if you have a loan to pay for your unit, the debt is yours but the property belongs to the bank until said debt is paid. This isn’t a lesson in personal economics or the philosophies of ownership, however: it’s an account of my journey through the process of remodeling my condo and how I turned my diamond in the rough into a regal jewel fit for the King who inhabits it.

The first thing I noticed about the unit, and all units in this particular complex, is that the appliances are electric powered, with the exception of a fireplace, whose gas is covered by my Homeowners Association payments.  For all those wondering, natural gas power is cheaper than electricity, better to cook with, and more highly sought after in the housing market (which is to say, adds value to your property).  Luckily, my little slice of heaven sits in the perfect location for gas lines to be added because there is a crawl space underneath, allowing plumbing work to be done easily.

I’m getting ahead of myself.  The first task upon receiving my deed was to interview contractors.  A contractor is essentially a pimp, with a stable of subcontractors and laborers who do the actual work.  So, if I pay a contactor to add in gas lines, change my closet doors, retile a shower, redo some electrical work, add in an extra sink in the bathroom, install new windows and sliding glass doors, and repaint the condo—he goes out and pays a plumber, an electrician, a window guy, a tile guy, painters, a closet guy, and his ex-wife’s alimony.

Second Disclaimer:  When interviewing contractors, be wary of the low bidder, as there is a strong possibility he will charge you an arm and/or a leg for every little additional piece of work to make up for the fact that he low-balled you just to get the job.  Be upfront about the work you need done, don’t be afraid to let him know you’ll get someone else to do additions for cheaper if need be.  In my short, yet intense experience with remodeling, I have met plenty of homeowners who fired their contractor(s) for this very reason.

I chose the low bidder, and proceeded to begin work.  It was at this time I was informed that city permits would be required for installing new windows and sliding glass doors.

Third Disclaimer: City permits are a way for a town, such as Redondo Beach, CA, to fund and maintain the beautifully manicured landscape of its newly built and constantly improved municipal buildings.  They are, in a sense, extortion.  (Okay, okay, I guess they provide guidance for safe building practices and pragmatic construction) But in my case, they felt like tribute to a criminal overlord for permitting the improvement of what is, again, technically yours.

City permits, subsequently, require an HOA letter of approval for all proposed updates.  But, by the time my Association returned my messages regarding the windows, they had already been installed.  Then began arguments that the new windows did not match the old—not unfathomable considering the windows had not previously been updated since the Bicentennial, and city codes had changed a considerable amount since the Ford administration.  In the city of Redondo Beach, as in most cities, an egress window (one that can be used for escape in case of fire) must have a minimum opening of 24 inches—thus ensuring a plus sized buttocks may slide through easily, if snuggly, should a visiting relative decide to nap on your polyester couch while smoking a Kool Mild 100.  That is to say, in light of municipal requirements, the HOA graciously acquiesced.

This, however, was only the beginning of a long and arduous process of posturing and politicizing between the Homeowners Association, the city’s building department, and a contractor who clearly considers me his personal ATM machine.

Don’t let me sound negative or discouraging.  Sitting, finally, mercifully, on my very own couch, skimming through my Netflix queue and sipping scotch like the victory champagne of champions, the frustration and struggle of the past few months seems almost foreign to me.  Almost.  But, when I look down at my floors, the tile work done in my kitchen and around my fireplace, I see days of labor which had to be done by a separate team because I couldn’t trust my contractor to complete it.  I see hallway and bathroom walls that had to be gutted more than anticipated because a certain someone was unaware that Redondo Beach city codes require plumbing vents to be installed at least forty inches above the drain.  I see a washer and dryer that took me an additional two months to convince the HOA wouldn’t have a negative impact on the building’s drainage system—three separate plumbers were sought for advice to ensure an extra load of laundry wouldn’t back up the sink in the condo down the hall.

The misconception, or lie you may allow yourself to believe during a process such as this, is that this will be an easy process—that you will have the answers before the pitfalls arise.  Know that, especially your first time, you won’t forsee everything.  My only regret was letting myself believe what I heard during the initial walkthrough—that a three-week project couldn’t possibly turn into four to five months.  Looking around at my kingdom, however small it may be, the frustration and worry were worth every dollar and every ounce of sweat.  There is a path around every obstacle, if you keep a cool head.  And be certain from the beginning that the person you hire knows your city’s building regulations and requirements.

In the end, my greatest advice is that if you find yourself in the position I was in, stay positive and keep pushing forward.  I was lucky to have parents who had been through this before, and the love of a woman who kept me calm and collected.  So no matter how discouraged you may want to feel, remember that you earned your home, and that in end, it will be worth every moment of stress you feel.

Welcome home.

Photo by Meaghan Morrison

Photo by Meaghan Morrison

 

Home (Theater) Improvement

“This is the end of life as we have come to know and love it.” I thought as I watched thirty five square feet and 1080 progressively scanned lines of glorious television walk out of my life forever. My roommate, along with his beloved projector, was headed for greener pastures, leaving the rest of us to languish away into sad, lonesome, standard-def obscurity.

The Projector

There’s a lot of good literature out there on the Googles that will help guide you to the perfect projector. Since we had become accustomed to a certain standard of television, we were looking for a 1080p projector, 60Hz would do, with a minimum contrast ratio of 1:2000. But In terms of what kinds of projectors are available on the market (from the $200 VewSanic knock-off to the $20,000 3DMax Sound-O-Vision Extreme), the price range we were expecting was between $500 and $1000. But for us our wallets, we were just looking for something to “scrape by.” So, when we found an $800 projector that hit our minimum requirements, but was available for $580 through a special refurbished program, we jumped at it. BOOM. And we had a projector again.

Everything was hooked up to the cable and DVR—we turned it on and… there’s no sound. Maybe we should have thought this out better. With a trip to RadioShack for a ⅛” stereo to ¼” mono adapter, we were able to jury rig my fiancée Meggyn’s bass amp in as a temporary sound system. Well, at least it was loud and thumpy!

The Mount

Bliss settled in, until we realized we were merely maintaining the status quo. Like cavemen watching the firelight flicker across the wall. With the projector haphazardly settled on an end-table with a book underneath to prop it up, the risk of inebriated guests leaving open-topped drinks on the same table and toppling them into the delicate internals—the horror, the horror!—was just too high. Of course, I’d just dropped an inordinate sum of money on a brand new projector, so I wasn’t keen on the idea of dropping even more moolah on a television mount that wouldn’t directly affect the viewing experience.

One of the nice things about living in a leased house is that you never know what surprises you might find! After hunting around for extra shelving, I came across an old television mount up in the back corner of the garage (the kind for those tube TVs that could smash toddlers to atoms). And so began the next obstacle: the mount was bolted into a high wooden rafter in the garage, but we only had drywall in the living room… To Google! It turns out that as long as there’s a stud behind wherever you’re screwing in the mount, it should hold weight. After a trip to the local Ace hardware to buy some screws that could be used to drill to China and a quick download of the Bubble Level app—to make sure we weren’t setting ourselves up for a neck kink—we got to work. (Contrary to Meggyn’s expectations, the level app did a good job!)

And then failure struck—we broke two of the screws because we thought we could get away without drilling pilot holes. It’s TOOL TIME! We borrowed a drill (thanks, mom!), and we raised the projector up like the Mennonites raising a barn. Then we cracked open a few beers to celebrate exactly like the Mennonites would not have.

The Connections

Now we were getting somewhere! We could no longer inadvertently destroy all of our wonderful video goodness without some extra effort of lobbing liquids towards the ceiling. The next failure, of course, being that we couldn’t actually connect the cable or the power to our ascended projector. Who wanted to get lost in the details of connecting this, right? What are we, rocket surgeons?

To solve our connection problems, I repurposed some unused bookshelves I had bought for my room. With a few more marks and holes in the wall next to the projector mount, I added a shelf in the living room that we loaded up with every bit of television-related electronics. To paint the picture for you, we now had the projector on the old TV mount (in the dead-center of the wall), an overburdened shelf stacked with enough boxes with blinking lights that it may have been flagged by the NSA, a bass amp on the floor, and so many power cables and audio/video cables strewn about that they might as well have been vines in a nightmarish Lovecraftian dystopian future of cybertronic Amazonian forest… Let’s leave it at “messier than a dorm room during finals” and be done. But now that everything worked, I was at: “Please, for the love of God and all that is holy (and not blinking lights at me), let me be done.”

The Organization

Now we had a beautiful 1080p picture taking up the front wall and plenty of loud thumpy sounds to accompany it. Except if you changed the input from the cable to the Wii. Or to the Chromecast. Or to the Xbox. Was I the only one around here who understood which colors get connected to which inputs on the back of this thing?! Rather than attempting to teach every person who came to the house which cables to disconnect/reconnect to switch the audio whenever you switched the video feed (I just wasn’t up for writing the Connectionist Manifesto), I decided that another trip to RadioShack was in order. There I found an A/V switch for under $20 along with a few new A/V cables and a shiny new sound bar with subwoofer for definitely not under $20 (Meggyn was complaining about wanting her bass amp back and, hey, it was payday!). I returned to our humble, if electrically dangerous, abode armed with my new equipment, a sharpie, some wire ties, some labels, and as much determination as I could muster. I tackled the monumental task of improving our sound system, organizing our A/V shelf, wire managing all of the dangly bits (can’t leave any extra 1s or 0s), and setting our theater system up in such a way that at the press of a (CLEARLY LABELLED) button, my roomies, or any of our guests, could switch between video and audio streams at will.

The Finishing Touches

Life almost seemed perfect. It was simple enough to use the newly organized system, the new sound system was much more balanced than a 15 Watt bass amp, and whatever we watched was beautiful (except the Wii… stupid standard-definition output). But if you can’t find a problem to fix, then you aren’t looking hard enough. Some of the darker colors were being washed together by the projector, and it was sometimes hard to tell what was going on during scenes that took place in the dark. Blackout curtains became the next addition to the room. We got these thanks to a generous donation of leftover fabric from Meggyn’s mom. They just barely cover the full width of our window, but it works. Now, we can watch the projector during the day as if it were the middle of the night (without that pesky bedtime thing). Our last improvement was to go to OSH and buy some cinder blocks, push the couch forward so that it was closer to the wall (or rather, the screen), drop the cinder blocks behind the old couch and ADD ANOTHER  COUCH. Because couch. Now, we’ve got theater-style seating to go with our home-theater!

I still don’t think we’re done making improvements, but for the moment we’re pretty happy with how everything turned out. And the only really spendy parts were the projector itself and the sound bar—things which will be following us to our next house! Thanks to some successful craigslist foraging, the new couch was free, and the cinder blocks we used to prop it up were a few dollars apiece. We used five blocks for the couch and another three to make a recycled-plywood footrest.

All-in-all, we could have done a much worse (much more expensive) job of converting our living room into one radical home theater.

Photo by Michael Cox

Photo by Michael Cox